Pewter for Adjustable Tips

Home     Selecting a Wood        Shuttle Style     Shuttle Size    Personalization    To Order       Making Tatting Shuttles     David@DavidReedSmith.com

The Pewter Shuttle has a layer of pewter substituted for the middle layer of veneer in the bottom shell.  The pewter is exposed for the last half inch of each tip.  The pewter bends very easily and doesn't spring back much.  The end result is that the tips become easily adjustable.  In fact, passing some thread through the tips will automatically open the tips to just barely click on the thread.

Walnut and Pewter Shuttle with Brass Spike

I am using a modern safe lead free pewter.  It is 91% Tin, 7% Antimony and 2% copper.  I tested for color transfer by trying to "write" on paper with bare pewter and didn't see any color deposited on the paper, although I pressed hard enough to dent the paper.

Since the pewter is easily and repeatedly adjustable (as long as you don't make huge bends) you can open the tips to make winding on easier.  You can adjust the tips just past where they click if you need to tat silently.  You can use the same shuttle for the heaviest to finest threads and you can adjust the tips where they will not damage delicate thread.

Adding pewter is an option for 2, 2-1/2, 2-3/4, 3 and 3-3/8 inch shuttles in any point style.  It is not available with the 2-1/4 inch shuttle as that is a special case and the pewter would not look right with an oil finish.

You can adjust the tips however is convenient for your working style so long as you don't them very far (not more than 1/8" separation) and  don't place stress on the shell/post joint.  Here is a way I've found most convenient:

To close a tip, hold the shuttle with both thumbs on the tip you want to close.  Place both index fingers under the top shell to avoid stressing the shell/post joint.  Place both middle and ring fingers under the bottom shell.  Place both little fingers on top of both shells to keep the shuttle from rotating in your hands.  Press with your thumbs to adjust the tip and the wood tip and pewter tip will bend.  When you release pressure the wood tip will spring back more than the pewter tip, closing or partially closing the tip.  To open the tips just turn the shuttle over in your hand and press on the wooden tip.

Hand position to close tip.